BodenWarme Electric Undertile Heating Cable Kit 150w with Black dSTAT Thermostat

Are you tired of stepping on your cold tiled floor? If so, this 150-watt Electric Undertile Heating Cable Kit from BodenWärme with sleek black dSTAT Thermostat could be the perfect solution for you. An excellent choice for rooms with ceramic, porcelain or natural stone floors, this kit will provide a consistent and comfortable level of heat that will be a perfect addition to your bathroom. The flexible cable can be positioned around obstacles such as architectural features and fixtures such as bathtubs and large furniture, and it is also suited to small and irregularly shaped rooms.

The BodenWärme Electric Undertile Heating Cable Kit will provide your rooms with sufficient power to deliver a single-source heating solution, meaning no need for radiators taking up space. Whereas traditional radiator heating systems are often prone to causing hot and cold spots, the BodenWärme Electric Undertile Heating Cable Kit maintains a comfortable heating profile where your feet are kept warm and your head remains cool.

Features & Benefits: BodenWarme Electric Undertile Heating Cable Kit 150w with Black dSTAT Thermostat

• Perfect for bathrooms and any other room where fixtures need to be avoided
• Ideal for small and irregularly shaped rooms
• Robust dual-core 3.6mm wire with simple, single connection point keeps the increase in floor height to a minimum
• Tough Fluoropolymer conducting insulation with PVC outer insulation ensures durability
• Lifetime warranty for total peace of mind
• Modern black thermostat design
• This digital thermostat has a range of features including Key Lock, 7-day weekly programming and adaptive learning

Each kit comes with a digital dSTAT Thermostat, featuring a stylish black finish. As well as a 'Key Lock' function, this digital thermostat features adaptive learning and weekly programming capabilities.

The robust and reliable BodenWärme Electric Undertile Heating Cable Kit are backed with a lifetime warranty while the thermostats are covered by specific manufacturer backed warranties giving you peace of mind.

How should I calculate the correct size BodenWärme heating kit?

To calculate which kit size is right for your project, you need to first work out the area of the entire floor space by multiplying the width of the floor by the length. Once this is done, you should then deduct any fixed furniture from the area with a clearance of less than 50mm above the floor. This will eliminate the risk of causing hot spots in your room. Once you have a total area minus the deductions, you should deduct a further 10% from your total as this will allow for the spacing between cables and for spacing around the perimeter of the room.

Kit Contents

• 1 x BodenWärme 150w/m² underfloor heating cable
• 1 x dSTAT Electric Underfloor thermostat in black
• 1 x Floor temperature sensor with 3m cable and flexible conduit
• 1 x Comprehensive installation manual
• 1 x 25mm fixing tape
• Lifetime Warranty

Standards & Certification

• CE Certified
• RoHS Compliant (for guaranteed safety)

Please note:

• Cables cannot be shortened or have excess cut off at the end. Unfortunately, once the cables have been cut/trimmed, you cannot return them.
• The maximum total size of 150w/m² BodenWärme underfloor heating cables that a single thermostat can control is 20m². Should you require to cover an area greater than 20m², the area should be divided into separate zones and controlled via multiple thermostats.
• As with all electrical projects governed by Part P regulations, a certified electrician must undertake all mains electrical connections.
• The heating must be protected by a 30 Amp Residual Current Device (30mA RCD), protecting against electric shock. This can be situated within the consumer unit or via a dedicated fused spur.
• You should also ensure that the total current of your heating system does not exceed the current capacity of the circuit it is connected to. Standard domestic ring circuits are rated at 13 Amp, and you can take an electrical feed via a single 13 Amp fused spur.