BodenWarme Electric Undertile Heating Mat 150w with White dSTAT Thermostat

This easy-to-install energy-efficient underfloor heating solution is designed specifically for rooms with porcelain, ceramic and natural stone flooring. The 150w BodenWärme Electric Undertile Heating Mat with a user-friendly white dSTAT Thermostat will provide your home with a consistent and comfortable temperature that eliminates hot or cold spots.

The mat's rapid fit sticky mesh technology ensures a quick and easy installation compared to other heating methods such as cable systems. Whereas traditional radiators distribute heat from a single point within your room, BodenWärme's Electric Undertile Heating Mats generate heat that is evenly distributed across the area of your floor. They can also be used as a primary heat source, provided the room is well-insulated.

Features & Benefits: BodenWarme Electric Undertile Heating Mat 150w with White dSTAT Thermostat

• Thermostat has a range of features including adaptive learning, 7-day weekly programming and Key Lock
• Sleek and modern gloss white thermostat design
• Rapid fit sticky mesh ensures speed and ease of installation
• Tough Fluoropolymer conducting insulation with PVC outer insulation ensures durability
• Robust 3.6mm wire keeps the increase in floor height to a minimum
• Dual-core wire with simple, single connection point
• Lifetime manufacturer-backed warranty for complete peace of mind

To increase the overall energy efficiency of your room, why not install your heating mats over 6mm or 10mm thick underfloor heating insulation boards? This will speed up heat times and reduce heat loss through uninsulated floors.

Each kit comes with a dSTAT Thermostat, featuring a modern white finish. As well as a 'Key Lock' function, this digital thermostat features adaptive learning and weekly programming capabilities. The BodenWärme Heating Mats are backed with a manufacturer's lifetime warranty, while the thermostats are covered by specific manufacturer-backed warranties giving peace of mind.

How do I calculate the correct size of BodenWärme heating kit?

To calculate which kit size is right for your project, you need to first work out the area of the entire floor space by multiplying the width of the floor by the length. Once this is done, you should then deduct any fixed furniture from the area with a clearance of less than 50mm above the floor. This will eliminate the risk of causing hot spots in your room. Once you have a total area minus the deductions, you should deduct a further 10% from your total as this will allow for the spacing between mats and around the perimeter of the room.

Kit Contents

• BodenWärme 150w/m² underfloor heating mat with rapid fit sticky mesh
• dSTAT Electric Underfloor thermostat in white
• Floor temperature sensor with 3m cable and flexible conduit
• Comprehensive installation manual
• 25mm fixing tape

Standards & Certification

• Fully CE Certified
• RoHS Compliant (for guaranteed safety)

Please note:

• Heat mats cannot be shortened or have excess cut off at the end. Unfortunately, once the mats have been cut/trimmed, you cannot return them.
• The maximum total size of 150w/m² BodenWärme underfloor heating mats that a single thermostat can control is 20m². Should you require to cover an area greater than 20m², the area should be divided into separate zones and controlled via multiple thermostats.
• As with all electrical projects governed by Part P regulations, a certified electrician must undertake all mains electrical connections.
• The heating must be protected by a 30 Amp Residual Current Device (30mA RCD), protecting against electric shock. This can be situated within the consumer unit or via a dedicated fused spur.
• You should also ensure that the total current of your heating system does not exceed the current capacity of the circuit it is connected to. Standard domestic ring circuits are rated at 13 Amp, and you can take an electrical feed via a single 13 Amp fused spur.